BQNQS - PLEXIGLAS G ACRYLIC SHEET
- MSDS: BQNQS
- Manufacturer: ROHM AND HAAS CO
- Product Name: PLEXIGLAS G ACRYLIC SHEET
- National Stock Number: 9330-00-563-4527
Product Identification
Product ID:PLEXIGLAS G ACRYLIC SHEET
MSDS Date:09/06/1990
FSC:9330
NIIN:00-563-4527
MSDS Number: BQNQS
Responsible Party
PHILADELPHIA, PA 19105
US
Cage: 77902
Contractor
Telephone: 215-592-2521/215-592-3000
Cage: 77902
Ingredients
POLYMETHYLMETHACRYLATE
CAS: 9011-14-7
RTECS: TR0400000
Fraction By Weight: 98.5%
METHYL METHACRYLATE (SARA III)
CAS: 80-62-6
RTECS: OZ5075000
Fraction By Weight: 1.5%
OSHA PEL 100 PPM
ACGIH TLV: 100 PPM; 9293
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION-INHALATION OF MONOMER VAPOR
FROM HEATED PRODUCT CAN CAUSE THE FOLLOWING: IRRITATION OF NOSE,
THROAT, AND LUNGS. EYE AND SKIN CONTACT-MONOMER VAPORS FROM HEATED
PRODUCT CAN CAUSE THE FOLLOWI NG: IRRITATION.
Explanation of Carcinogenicity:NOT A CARCINOGEN.
Effects of Overexposure:INHALATION-DIZZINESS, HEADACHE, NAUSEA.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:INHALATION-MOVE SUBJECT TO FRESH AIR. EYE CONTACT-FLUSH EYES
WITH A LARGE AMOUNT OF WATER FOR AT LEAST 15 MINUTES.
Fire Fighting
Extinguishing Media:USE EXTINGUISHING MEDIA APPROPIATE FOR SURROUNDING
FIRE.
Fire Fighting Procedures:AS IN ANY FIRE, WEAR SELF-CONTAINED BREATHING
APPARATUS (PRESSURE-DEMAND; MSHA/NIOSH APPROVED OR EQUIVALENT) AND
WEAR FULL PROTECTIVE GEAR.
Unusual Fire/Explosion Hazard:MATERIAL AS SOLD IS COMBUSTIBLE; BURNS
VIGOROUSLY WITH INTENSE HEAT.
Accidental Release
Spill Release Procedures:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:AVOID TEMPERATURE EXTREMES DURING
STORAGE; AMBIENT TEMPERATURE PREFERRED.
Other Precautions:THIS MATERIAL CAN RELEASE MAONMER VAPORS OR GASES
WHEN HEATED TO HIGH TEMPERATURES DURING PROCESSING, CUTTING OR
MACHINING.
Exposure Controls
Respiratory Protection:NONE REQUIRED UNDER NORMAL OPERATING CONDITIONS.
Ventilation:USE LOCAL EXHAUST VENTILATION WITH A MINIMUM CAPTURE
VELOCITY OF 150FT/MIN AT THE POINT OF DUST OR MIST EVOLUTION.
Protective Gloves:COTTON OF CANVAS GLOVES.
Eye Protection:USE SAFETY GLASSES / APPROVED EQUIVALENT
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
THIS PRODUCT IS CONSIDERED HAZARDOUS UNDER THE OSHA HAZARD
COMMUNICATION STANDARD DUE TO THE POTENTIAL FOR OVEREXPOSURE TO
METHYLMETHACRYLATE MONOMER VAPORS WHICH MAY BE GENERATED DURING
PROCESSING.
Chemical Properties
HCC:N1
Spec Gravity:1.19
Appearance and Odor:CLEAR TO OPAQUE SHEET, ODORLESS.
Stability
Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH ACIDS, ALKALIES AND STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:AVOID TEMPERATURES ABOVE 260C/500F FOR
PROLONGED PERIODS TO PREVENT SLOW DECOMPOSITION.
Hazardous Decomposition Products:THERMAL DECOMPOSITION MAY YIELD
ACRYLIC MONOMERS.
Disposal
Waste Disposal Methods:FOR DISPOSAL INCINERATE THIS MATERIAL AT A
FACILITY THAT COMPLIES WITH LOCAL, STAE AND FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.